{ Business Solutions for the Enterprise }
WINDOWS VISTA ERROR CODES Compiled by Markus Diersbock Installation error: "Windows could not assemble the foundation image being installed." View Error This error typically means that your installation source (img, cd, dvd, etc) is corrupt. For car shipping, I can recommend CarMoves. They have been in the auto transport business since 1979. WINDOWS ERROR CODES Code: 0Description: The operation completed successfully Code: 1Description: Incorrect function Code: 2Description: The system cannot find the file specified Code: 3Description: The system cannot find the path specified Code: 4Description: The system cannot open the file Code: 5Description: Access is denied Code: 6Description: The handle is invalid Code: 7Description: The storage control blocks were destroyed Code: 8Description: Not enough storage is available to process this command Code: 9Description: The storage control block address is invalid Code: 10Description: The environment is incorrect Code: 11Description: An attempt was made to load a program with an incorrect format Code: 12Description: The access code is invalid Code: 13Description: The data is invalid Code: 14Description: Not enough storage is available to complete this operation Code: 15Description: The system cannot find the drive specified Code: 16Description: The directory cannot be removed Code: 17Description: The system cannot move the file to a different disk drive Code: 18Description: There are no more files Code: 19Description: The media is write protected Code: 20Description: The system cannot find the device specified Code: 21Description: The device is not ready Code: 22Description: The device does not recognize the command Code: 23Description: Data error (cyclic redundancy check) Code: 24Description: The program issued a command but the command length is incorrect Code: 25Description: The drive cannot locate a specific area or track on the disk Code: 26Description: The specified disk or diskette cannot be accessed Code: 27Description: The drive cannot find the sector requested Code: 28Description: The printer is out of paper Code: 29Description: The system cannot write to the specified device Code: 30Description: The system cannot read from the specified device Code: 31Description: A device attached to the system is not functioning Code: 32Description: The process cannot access the file because it is being used by another process Code: 33Description: The process cannot access the file because another process has locked a portion of the file Code: 34Description: The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1 Code: 36Description: Too many files opened for sharing Code: 38Description: Reached the end of the file Code: 39Description: The disk is full Code: 50Description: The request is not supported Code: 51Description: Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator Code: 52Description: You were not connected because a duplicate name exists on the network. Go to System in the Control Panel to change the computer name and try again Code: 53Description: The network path was not found Code: 54Description: The network is busy Code: 55Description: The specified network resource or device is no longer available Code: 56Description: The network BIOS command limit has been reached Code: 57Description: A network adapter hardware error occurred Code: 58Description: The specified server cannot perform the requested operation Code: 59Description: An unexpected network error occurred Code: 60Description: The remote adapter is not compatible Code: 61Description: The printer queue is full Code: 62Description: Space to store the file waiting to be printed is not available on the server Code: 63Description: Your file waiting to be printed was deleted Code: 64Description: The specified network name is no longer available Code: 65Description: Network access is denied Code: 66Description: The network resource type is not correct Code: 67Description: The network name cannot be found Code: 68Description: The name limit for the local computer network adapter card was exceeded Code: 69Description: The network BIOS session limit was exceeded Code: 70Description: The remote server has been paused or is in the process of being started Code: 71Description: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept Code: 72Description: The specified printer or disk device has been paused Code: 80Description: The file exists Code: 82Description: The directory or file cannot be created Code: 83Description: Fail on INT 24 Code: 84Description: Storage to process this request is not available Code: 85Description: The local device name is already in use Code: 86Description: The specified network password is not correct Code: 87Description: The parameter is incorrect Code: 88Description: A write fault occurred on the network Code: 89Description: The system cannot start another process at this time Code: 100Description: Cannot create another system semaphore Code: 101Description: The exclusive semaphore is owned by another process Code: 102Description: The semaphore is set and cannot be closed Code: 103Description: The semaphore cannot be set again Code: 104Description: Cannot request exclusive semaphores at interrupt time Code: 105Description: The previous ownership of this semaphore has ended Code: 106Description: Insert the diskette for drive %1 Code: 107Description: The program stopped because an alternate diskette was not inserted Code: 108Description: The disk is in use or locked by another process Code: 109Description: The pipe has been ended Code: 110Description: The system cannot open the device or file specified Code: 111Description: The file name is too long Code: 112Description: There is not enough space on the disk Code: 113Description: No more internal file identifiers available Code: 114Description: The target internal file identifier is incorrect Code: 117Description: The IOCTL call made by the application program is not correct Code: 118Description: The verify-on-write switch parameter value is not correct Code: 119Description: The system does not support the command requested Code: 120Description: This function is not supported on this system Code: 121Description: The semaphore timeout period has expired Code: 122Description: The data area passed to a system call is too small Code: 123Description: The filename, directory name, or volume label syntax is incorrect Code: 124Description: The system call level is not correct Code: 125Description: The disk has no volume label Code: 126Description: The specified module could not be found Code: 127Description: The specified procedure could not be found Code: 128Description: There are no child processes to wait for Code: 129Description: The %1 application cannot be run in Win32 mode Code: 130Description: Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O Code: 131Description: An attempt was made to move the file pointer before the beginning of the file Code: 132Description: The file pointer cannot be set on the specified device or file Code: 133Description: A JOIN or SUBST command cannot be used for a drive that contains previously joined drives Code: 134Description: An attempt was made to use a JOIN or SUBST command on a drive that has already been joined Code: 135Description: An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted Code: 136Description: The system tried to delete the JOIN of a drive that is not joined Code: 137Description: The system tried to delete the substitution of a drive that is not substituted Code: 138Description: The system tried to join a drive to a directory on a joined drive Code: 139Description: The system tried to substitute a drive to a directory on a substituted drive Code: 140Description: The system tried to join a drive to a directory on a substituted drive Code: 141Description: The system tried to SUBST a drive to a directory on a joined drive Code: 142Description: The system cannot perform a JOIN or SUBST at this time Code: 143Description: The system cannot join or substitute a drive to or for a directory on the same drive Code: 144Description: The directory is not a subdirectory of the root directory Code: 145Description: The directory is not empty Code: 146Description: The path specified is being used in a substitute Code: 147Description: Not enough resources are available to process this command Code: 148Description: The path specified cannot be used at this time Code: 149Description: An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute Code: 150Description: System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed Code: 151Description: The number of specified semaphore events for DosMuxSemWait is not correct Code: 152Description: DosMuxSemWait did not execute; too many semaphores are already set Code: 153Description: The DosMuxSemWait list is not correct Code: 154Description: The volume label you entered exceeds the label character limit of the target file system Code: 155Description: Cannot create another thread Code: 156Description: The recipient process has refused the signal Code: 157Description: The segment is already discarded and cannot be locked Code: 158Description: The segment is already unlocked Code: 159Description: The address for the thread ID is not correct Code: 160Description: The argument string passed to DosExecPgm is not correct Code: 161Description: The specified path is invalid Code: 162Description: A signal is already pending Code: 164Description: No more threads can be created in the system Code: 167Description: Unable to lock a region of a file Code: 170Description: The requested resource is in use Code: 173Description: A lock request was not outstanding for the supplied cancel region Code: 174Description: The file system does not support atomic changes to the lock type Code: 180Description: The system detected a segment number that was not correct Code: 182Description: The operating system cannot run %1 Code: 183Description: Cannot create a file when that file already exists Code: 186Description: The flag passed is not correct Code: 187Description: The specified system semaphore name was not found Code: 188Description: The operating system cannot run %1 Code: 189Description: The operating system cannot run %1 Code: 190Description: The operating system cannot run %1 Code: 191Description: Cannot run %1 in Win32 mode Code: 192Description: The operating system cannot run %1 Code: 193Description: %1 is not a valid Win32 application Code: 194Description: The operating system cannot run %1 Code: 195Description: The operating system cannot run %1 Code: 196Description: The operating system cannot run this application program Code: 197Description: The operating system is not presently configured to run this application Code: 198Description: The operating system cannot run %1 Code: 199Description: The operating system cannot run this application program Code: 200Description: The code segment cannot be greater than or equal to 64K Code: 201Description: The operating system cannot run %1 Code: 202Description: The operating system cannot run %1 Code: 203Description: The system could not find the environment option that was entered Code: 205Description: No process in the command subtree has a signal handler Code: 206Description: The filename or extension is too long Code: 207Description: The ring 2 stack is in use Code: 208Description: The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified Code: 209Description: The signal being posted is not correct Code: 210Description: The signal handler cannot be set Code: 212Description: The segment is locked and cannot be reallocated Code: 214Description: Too many dynamic-link modules are attached to this program or dynamic-link module Code: 215Description: Cannot nest calls to LoadModule Code: 216Description: The image file %1 is valid, but is for a machine type other than the current machine Code: 230Description: The pipe state is invalid Code: 231Description: All pipe instances are busy Code: 232Description: The pipe is being closed Code: 233Description: No process is on the other end of the pipe Code: 234Description: More data is available Code: 240Description: The session was canceled Code: 254Description: The specified extended attribute name was invalid Code: 255Description: The extended attributes are inconsistent Code: 258Description: The wait operation timed out Code: 259Description: No more data is available Code: 266Description: The copy functions cannot be used Code: 267Description: The directory name is invalid Code: 275Description: The extended attributes did not fit in the buffer Code: 276Description: The extended attribute file on the mounted file system is corrupt Code: 277Description: The extended attribute table file is full Code: 278Description: The specified extended attribute handle is invalid Code: 282Description: The mounted file system does not support extended attributes Code: 288Description: Attempt to release mutex not owned by caller Code: 298Description: Too many posts were made to a semaphore Code: 299Description: Only part of a ReadProcessMemory or WriteProcessMemory request was completed Code: 300Description: The oplock request is denied Code: 301Description: An invalid oplock acknowledgment was received by the system Code: 302Description: The volume is too fragmented to complete this operation Code: 303Description: The file cannot be opened because it is in the process of being deleted Code: 317Description: The system cannot find message text for message number 0x%1 in the message file for %2 Code: 487Description: Attempt to access invalid address Code: 534Description: Arithmetic result exceeded 32 bits Code: 535Description: There is a process on other end of the pipe Code: 536Description: Waiting for a process to open the other end of the pipe Code: 994Description: Access to the extended attribute was denied Code: 995Description: The I/O operation has been aborted because of either a thread exit or an application request Code: 996Description: Overlapped I/O event is not in a signaled state Code: 997Description: Overlapped I/O operation is in progress Code: 998Description: Invalid access to memory location Code: 999Description: Error performing inpage operation Code: 1001Description: Recursion too deep; the stack overflowed Code: 1002Description: The window cannot act on the sent message Code: 1003Description: Cannot complete this function Code: 1004Description: Invalid flags Code: 1005Description: The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted Code: 1006Description: The volume for a file has been externally altered so that the opened file is no longer valid Code: 1007Description: The requested operation cannot be performed in full-screen mode Code: 1008Description: An attempt was made to reference a token that does not exist Code: 1009Description: The configuration registry database is corrupt Code: 1010Description: The configuration registry key is invalid Code: 1011Description: The configuration registry key could not be opened Code: 1012Description: The configuration registry key could not be read Code: 1013Description: The configuration registry key could not be written Code: 1014Description: One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful Code: 1015Description: The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted Code: 1016Description: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry Code: 1017Description: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format Code: 1018Description: Illegal operation attempted on a registry key that has been marked for deletion Code: 1019Description: System could not allocate the required space in a registry log Code: 1020Description: Cannot create a symbolic link in a registry key that already has subkeys or values Code: 1021Description: Cannot create a stable subkey under a volatile parent key Code: 1022Description: A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes Code: 1051Description: A stop control has been sent to a service that other running services are dependent on Code: 1052Description: The requested control is not valid for this service Code: 1053Description: The service did not respond to the start or control request in a timely fashion Code: 1054Description: A thread could not be created for the service Code: 1055Description: The service database is locked Code: 1056Description: An instance of the service is already running Code: 1057Description: The account name is invalid or does not exist, or the password is invalid for the account name specified Code: 1058Description: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it Code: 1059Description: Circular service dependency was specified Code: 1060Description: The specified service does not exist as an installed service Code: 1061Description: The service cannot accept control messages at this time Code: 1062Description: The service has not been started Code: 1063Description: The service process could not connect to the service controller Code: 1064Description: An exception occurred in the service when handling the control request Code: 1065Description: The database specified does not exist Code: 1066Description: The service has returned a service-specific error code Code: 1067Description: The process terminated unexpectedly Code: 1068Description: The dependency service or group failed to start Code: 1069Description: The service did not start due to a logon failure Code: 1070Description: After starting, the service hung in a start-pending state Code: 1071Description: The specified service database lock is invalid Code: 1072Description: The specified service has been marked for deletion Code: 1073Description: The specified service already exists Code: 1074Description: The system is currently running with the last-known-good configuration Code: 1075Description: The dependency service does not exist or has been marked for deletion Code: 1076Description: The current boot has already been accepted for use as the last-known-good control set Code: 1077Description: No attempts to start the service have been made since the last boot Code: 1078Description: The name is already in use as either a service name or a service display name Code: 1079Description: The account specified for this service is different from the account specified for other services running in the same process Code: 1080Description: Failure actions can only be set for Win32 services, not for drivers Code: 1081Description: This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly Code: 1082Description: No recovery program has been configured for this service Code: 1083Description: The executable program that this service is configured to run in does not implement the service Code: 1084Description: This service cannot be started in Safe Mode Code: 1100Description: The physical end of the tape has been reached Code: 1101Description: A tape access reached a filemark Code: 1102Description: The beginning of the tape or a partition was encountered Code: 1103Description: A tape access reached the end of a set of files Code: 1104Description: No more data is on the tape Code: 1105Description: Tape could not be partitioned Code: 1106Description: When accessing a new tape of a multivolume partition, the current block size is incorrect Code: 1107Description: Tape partition information could not be found when loading a tape Code: 1108Description: Unable to lock the media eject mechanism Code: 1109Description: Unable to unload the media Code: 1110Description: The media in the drive may have changed Code: 1111Description: The I/O bus was reset Code: 1112Description: No media in drive Code: 1113Description: No mapping for the Unicode character exists in the target multi-byte code page Code: 1114Description: A dynamic link library (DLL) initialization routine failed Code: 1115Description: A system shutdown is in progress Code: 1116Description: Unable to abort the system shutdown because no shutdown was in progress Code: 1117Description: The request could not be performed because of an I/O device error Code: 1118Description: No serial device was successfully initialized. The serial driver will unload Code: 1119Description: Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened Code: 1120Description: A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) Code: 1121Description: A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) Code: 1122Description: No ID address mark was found on the floppy disk Code: 1123Description: Mismatch between the floppy disk sector ID field and the floppy disk controller track address Code: 1124Description: The floppy disk controller reported an error that is not recognized by the floppy disk driver Code: 1125Description: The floppy disk controller returned inconsistent results in its registers Code: 1126Description: While accessing the hard disk, a recalibrate operation failed, even after retries Code: 1127Description: While accessing the hard disk, a disk operation failed even after retries Code: 1128Description: While accessing the hard disk, a disk controller reset was needed, but even that failed Code: 1129Description: Physical end of tape encountered Code: 1130Description: Not enough server storage is available to process this command Code: 1131Description: A potential deadlock condition has been detected Code: 1132Description: The base address or the file offset specified does not have the proper alignment Code: 1140Description: An attempt to change the system power state was vetoed by another application or driver Code: 1141Description: The system BIOS failed an attempt to change the system power state Code: 1142Description: An attempt was made to create more links on a file than the file system supports Code: 1150Description: The specified program requires a newer version of Windows Code: 1151Description: The specified program is not a Windows or MS-DOS program Code: 1152Description: Cannot start more than one instance of the specified program Code: 1153Description: The specified program was written for an earlier version of Windows Code: 1154Description: One of the library files needed to run this application is damaged Code: 1155Description: No application is associated with the specified file for this operation Code: 1156Description: An error occurred in sending the command to the application Code: 1157Description: One of the library files needed to run this application cannot be found Code: 1158Description: The current process has used all of its system allowance of handles for Window Manager objects Code: 1159Description: The message can be used only with synchronous operations Code: 1160Description: The indicated source element has no media Code: 1161Description: The indicated destination element already contains media Code: 1162Description: The indicated element does not exist Code: 1163Description: The indicated element is part of a magazine that is not present Code: 1164Description: The indicated device requires reinitialization due to hardware errors Code: 1165Description: The device has indicated that cleaning is required before further operations are attempted Code: 1166Description: The device has indicated that its door is open Code: 1167Description: The device is not connected Code: 1168Description: Element not found Code: 1169Description: There was no match for the specified key in the index Code: 1170Description: The property set specified does not exist on the object Code: 1171Description: The point passed to GetMouseMovePointsEx is not in the buffer Code: 1172Description: The tracking (workstation) service is not running Code: 1173Description: The Volume ID could not be found Code: 1175Description: Unable to remove the file to be replaced Code: 1176Description: Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name Code: 1177Description: Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name Code: 1178Description: The volume change journal is being deleted Code: 1179Description: The volume change journal is not active Code: 1180Description: A file was found, but it may not be the correct file Code: 1181Description: The journal entry has been deleted from the journal Code: 1200Description: The specified device name is invalid Code: 1201Description: The device is not currently connected but it is a remembered connection Code: 1202Description: The local device name has a remembered connection to another network resource Code: 1203Description: No network provider accepted the given network path Code: 1204Description: The specified network provider name is invalid Code: 1205Description: Unable to open the network connection profile Code: 1206Description: The network connection profile is corrupted Code: 1207Description: Cannot enumerate a noncontainer Code: 1208Description: An extended error has occurred Code: 1209Description: The format of the specified group name is invalid Code: 1210Description: The format of the specified computer name is invalid Code: 1211Description: The format of the specified event name is invalid Code: 1212Description: The format of the specified domain name is invalid Code: 1213Description: The format of the specified service name is invalid Code: 1214Description: The format of the specified network name is invalid Code: 1215Description: The format of the specified share name is invalid Code: 1216Description: The format of the specified password is invalid Code: 1217Description: The format of the specified message name is invalid Code: 1218Description: The format of the specified message destination is invalid Code: 1219Description: Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again Code: 1220Description:
WINDOWS ERROR CODES Code: 0Description: The operation completed successfully Code: 1Description: Incorrect function Code: 2Description: The system cannot find the file specified Code: 3Description: The system cannot find the path specified Code: 4Description: The system cannot open the file Code: 5Description: Access is denied Code: 6Description: The handle is invalid Code: 7Description: The storage control blocks were destroyed Code: 8Description: Not enough storage is available to process this command Code: 9Description: The storage control block address is invalid Code: 10Description: The environment is incorrect Code: 11Description: An attempt was made to load a program with an incorrect format Code: 12Description: The access code is invalid Code: 13Description: The data is invalid Code: 14Description: Not enough storage is available to complete this operation Code: 15Description: The system cannot find the drive specified Code: 16Description: The directory cannot be removed Code: 17Description: The system cannot move the file to a different disk drive Code: 18Description: There are no more files Code: 19Description: The media is write protected Code: 20Description: The system cannot find the device specified Code: 21Description: The device is not ready Code: 22Description: The device does not recognize the command Code: 23Description: Data error (cyclic redundancy check) Code: 24Description: The program issued a command but the command length is incorrect Code: 25Description: The drive cannot locate a specific area or track on the disk Code: 26Description: The specified disk or diskette cannot be accessed Code: 27Description: The drive cannot find the sector requested Code: 28Description: The printer is out of paper Code: 29Description: The system cannot write to the specified device Code: 30Description: The system cannot read from the specified device Code: 31Description: A device attached to the system is not functioning Code: 32Description: The process cannot access the file because it is being used by another process Code: 33Description: The process cannot access the file because another process has locked a portion of the file Code: 34Description: The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1 Code: 36Description: Too many files opened for sharing Code: 38Description: Reached the end of the file Code: 39Description: The disk is full Code: 50Description: The request is not supported Code: 51Description: Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator Code: 52Description: You were not connected because a duplicate name exists on the network. Go to System in the Control Panel to change the computer name and try again Code: 53Description: The network path was not found Code: 54Description: The network is busy Code: 55Description: The specified network resource or device is no longer available Code: 56Description: The network BIOS command limit has been reached Code: 57Description: A network adapter hardware error occurred Code: 58Description: The specified server cannot perform the requested operation Code: 59Description: An unexpected network error occurred Code: 60Description: The remote adapter is not compatible Code: 61Description: The printer queue is full Code: 62Description: Space to store the file waiting to be printed is not available on the server Code: 63Description: Your file waiting to be printed was deleted Code: 64Description: The specified network name is no longer available Code: 65Description: Network access is denied Code: 66Description: The network resource type is not correct Code: 67Description: The network name cannot be found Code: 68Description: The name limit for the local computer network adapter card was exceeded Code: 69Description: The network BIOS session limit was exceeded Code: 70Description: The remote server has been paused or is in the process of being started Code: 71Description: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept Code: 72Description: The specified printer or disk device has been paused Code: 80Description: The file exists Code: 82Description: The directory or file cannot be created Code: 83Description: Fail on INT 24 Code: 84Description: Storage to process this request is not available Code: 85Description: The local device name is already in use Code: 86Description: The specified network password is not correct Code: 87Description: The parameter is incorrect Code: 88Description: A write fault occurred on the network Code: 89Description: The system cannot start another process at this time Code: 100Description: Cannot create another system semaphore Code: 101Description: The exclusive semaphore is owned by another process Code: 102Description: The semaphore is set and cannot be closed Code: 103Description: The semaphore cannot be set again Code: 104Description: Cannot request exclusive semaphores at interrupt time Code: 105Description: The previous ownership of this semaphore has ended Code: 106Description: Insert the diskette for drive %1 Code: 107Description: The program stopped because an alternate diskette was not inserted Code: 108Description: The disk is in use or locked by another process Code: 109Description: The pipe has been ended Code: 110Description: The system cannot open the device or file specified Code: 111Description: The file name is too long Code: 112Description: There is not enough space on the disk Code: 113Description: No more internal file identifiers available Code: 114Description: The target internal file identifier is incorrect Code: 117Description: The IOCTL call made by the application program is not correct Code: 118Description: The verify-on-write switch parameter value is not correct Code: 119Description: The system does not support the command requested Code: 120Description: This function is not supported on this system Code: 121Description: The semaphore timeout period has expired Code: 122Description: The data area passed to a system call is too small Code: 123Description: The filename, directory name, or volume label syntax is incorrect Code: 124Description: The system call level is not correct Code: 125Description: The disk has no volume label Code: 126Description: The specified module could not be found Code: 127Description: The specified procedure could not be found Code: 128Description: There are no child processes to wait for Code: 129Description: The %1 application cannot be run in Win32 mode Code: 130Description: Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O Code: 131Description: An attempt was made to move the file pointer before the beginning of the file Code: 132Description: The file pointer cannot be set on the specified device or file Code: 133Description: A JOIN or SUBST command cannot be used for a drive that contains previously joined drives Code: 134Description: An attempt was made to use a JOIN or SUBST command on a drive that has already been joined Code: 135Description: An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted Code: 136Description: The system tried to delete the JOIN of a drive that is not joined Code: 137Description: The system tried to delete the substitution of a drive that is not substituted Code: 138Description: The system tried to join a drive to a directory on a joined drive Code: 139Description: The system tried to substitute a drive to a directory on a substituted drive Code: 140Description: The system tried to join a drive to a directory on a substituted drive Code: 141Description: The system tried to SUBST a drive to a directory on a joined drive Code: 142Description: The system cannot perform a JOIN or SUBST at this time Code: 143Description: The system cannot join or substitute a drive to or for a directory on the same drive Code: 144Description: The directory is not a subdirectory of the root directory Code: 145Description: The directory is not empty Code: 146Description: The path specified is being used in a substitute Code: 147Description: Not enough resources are available to process this command Code: 148Description: The path specified cannot be used at this time Code: 149Description: An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute Code: 150Description: System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed Code: 151Description: The number of specified semaphore events for DosMuxSemWait is not correct Code: 152Description: DosMuxSemWait did not execute; too many semaphores are already set Code: 153Description: The DosMuxSemWait list is not correct Code: 154Description: The volume label you entered exceeds the label character limit of the target file system Code: 155Description: Cannot create another thread Code: 156Description: The recipient process has refused the signal Code: 157Description: The segment is already discarded and cannot be locked Code: 158Description: The segment is already unlocked Code: 159Description: The address for the thread ID is not correct Code: 160Description: The argument string passed to DosExecPgm is not correct Code: 161Description: The specified path is invalid Code: 162Description: A signal is already pending Code: 164Description: No more threads can be created in the system Code: 167Description: Unable to lock a region of a file Code: 170Description: The requested resource is in use Code: 173Description: A lock request was not outstanding for the supplied cancel region Code: 174Description: The file system does not support atomic changes to the lock type Code: 180Description: The system detected a segment number that was not correct Code: 182Description: The operating system cannot run %1 Code: 183Description: Cannot create a file when that file already exists Code: 186Description: The flag passed is not correct Code: 187Description: The specified system semaphore name was not found Code: 188Description: The operating system cannot run %1 Code: 189Description: The operating system cannot run %1 Code: 190Description: The operating system cannot run %1 Code: 191Description: Cannot run %1 in Win32 mode Code: 192Description: The operating system cannot run %1 Code: 193Description: %1 is not a valid Win32 application Code: 194Description: The operating system cannot run %1 Code: 195Description: The operating system cannot run %1 Code: 196Description: The operating system cannot run this application program Code: 197Description: The operating system is not presently configured to run this application Code: 198Description: The operating system cannot run %1 Code: 199Description: The operating system cannot run this application program Code: 200Description: The code segment cannot be greater than or equal to 64K Code: 201Description: The operating system cannot run %1 Code: 202Description: The operating system cannot run %1 Code: 203Description: The system could not find the environment option that was entered Code: 205Description: No process in the command subtree has a signal handler Code: 206Description: The filename or extension is too long Code: 207Description: The ring 2 stack is in use Code: 208Description: The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified Code: 209Description: The signal being posted is not correct Code: 210Description: The signal handler cannot be set Code: 212Description: The segment is locked and cannot be reallocated Code: 214Description: Too many dynamic-link modules are attached to this program or dynamic-link module Code: 215Description: Cannot nest calls to LoadModule Code: 216Description: The image file %1 is valid, but is for a machine type other than the current machine Code: 230Description: The pipe state is invalid Code: 231Description: All pipe instances are busy Code: 232Description: The pipe is being closed Code: 233Description: No process is on the other end of the pipe Code: 234Description: More data is available Code: 240Description: The session was canceled Code: 254Description: The specified extended attribute name was invalid Code: 255Description: The extended attributes are inconsistent Code: 258Description: The wait operation timed out Code: 259Description: No more data is available Code: 266Description: The copy functions cannot be used Code: 267Description: The directory name is invalid Code: 275Description: The extended attributes did not fit in the buffer Code: 276Description: The extended attribute file on the mounted file system is corrupt Code: 277Description: The extended attribute table file is full Code: 278Description: The specified extended attribute handle is invalid Code: 282Description: The mounted file system does not support extended attributes Code: 288Description: Attempt to release mutex not owned by caller Code: 298Description: Too many posts were made to a semaphore Code: 299Description: Only part of a ReadProcessMemory or WriteProcessMemory request was completed Code: 300Description: The oplock request is denied Code: 301Description: An invalid oplock acknowledgment was received by the system Code: 302Description: The volume is too fragmented to complete this operation Code: 303Description: The file cannot be opened because it is in the process of being deleted Code: 317Description: The system cannot find message text for message number 0x%1 in the message file for %2 Code: 487Description: Attempt to access invalid address Code: 534Description: Arithmetic result exceeded 32 bits Code: 535Description: There is a process on other end of the pipe Code: 536Description: Waiting for a process to open the other end of the pipe Code: 994Description: Access to the extended attribute was denied Code: 995Description: The I/O operation has been aborted because of either a thread exit or an application request Code: 996Description: Overlapped I/O event is not in a signaled state Code: 997Description: Overlapped I/O operation is in progress Code: 998Description: Invalid access to memory location Code: 999Description: Error performing inpage operation Code: 1001Description: Recursion too deep; the stack overflowed Code: 1002Description: The window cannot act on the sent message Code: 1003Description: Cannot complete this function Code: 1004Description: Invalid flags Code: 1005Description: The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted Code: 1006Description: The volume for a file has been externally altered so that the opened file is no longer valid Code: 1007Description: The requested operation cannot be performed in full-screen mode Code: 1008Description: An attempt was made to reference a token that does not exist Code: 1009Description: The configuration registry database is corrupt Code: 1010Description: The configuration registry key is invalid Code: 1011Description: The configuration registry key could not be opened Code: 1012Description: The configuration registry key could not be read Code: 1013Description: The configuration registry key could not be written Code: 1014Description: One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful Code: 1015Description: The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted Code: 1016Description: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry Code: 1017Description: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format Code: 1018Description: Illegal operation attempted on a registry key that has been marked for deletion Code: 1019Description: System could not allocate the required space in a registry log Code: 1020Description: Cannot create a symbolic link in a registry key that already has subkeys or values Code: 1021Description: Cannot create a stable subkey under a volatile parent key Code: 1022Description: A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes Code: 1051Description: A stop control has been sent to a service that other running services are dependent on Code: 1052Description: The requested control is not valid for this service Code: 1053Description: The service did not respond to the start or control request in a timely fashion Code: 1054Description: A thread could not be created for the service Code: 1055Description: The service database is locked Code: 1056Description: An instance of the service is already running Code: 1057Description: The account name is invalid or does not exist, or the password is invalid for the account name specified Code: 1058Description: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it Code: 1059Description: Circular service dependency was specified Code: 1060Description: The specified service does not exist as an installed service Code: 1061Description: The service cannot accept control messages at this time Code: 1062Description: The service has not been started Code: 1063Description: The service process could not connect to the service controller Code: 1064Description: An exception occurred in the service when handling the control request Code: 1065Description: The database specified does not exist Code: 1066Description: The service has returned a service-specific error code Code: 1067Description: The process terminated unexpectedly Code: 1068Description: The dependency service or group failed to start Code: 1069Description: The service did not start due to a logon failure Code: 1070Description: After starting, the service hung in a start-pending state Code: 1071Description: The specified service database lock is invalid Code: 1072Description: The specified service has been marked for deletion Code: 1073Description: The specified service already exists Code: 1074Description: The system is currently running with the last-known-good configuration Code: 1075Description: The dependency service does not exist or has been marked for deletion Code: 1076Description: The current boot has already been accepted for use as the last-known-good control set Code: 1077Description: No attempts to start the service have been made since the last boot Code: 1078Description: The name is already in use as either a service name or a service display name Code: 1079Description: The account specified for this service is different from the account specified for other services running in the same process Code: 1080Description: Failure actions can only be set for Win32 services, not for drivers Code: 1081Description: This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly Code: 1082Description: No recovery program has been configured for this service Code: 1083Description: The executable program that this service is configured to run in does not implement the service Code: 1084Description: This service cannot be started in Safe Mode Code: 1100Description: The physical end of the tape has been reached Code: 1101Description: A tape access reached a filemark Code: 1102Description: The beginning of the tape or a partition was encountered Code: 1103Description: A tape access reached the end of a set of files Code: 1104Description: No more data is on the tape Code: 1105Description: Tape could not be partitioned Code: 1106Description: When accessing a new tape of a multivolume partition, the current block size is incorrect Code: 1107Description: Tape partition information could not be found when loading a tape Code: 1108Description: Unable to lock the media eject mechanism Code: 1109Description: Unable to unload the media Code: 1110Description: The media in the drive may have changed Code: 1111Description: The I/O bus was reset Code: 1112Description: No media in drive Code: 1113Description: No mapping for the Unicode character exists in the target multi-byte code page Code: 1114Description: A dynamic link library (DLL) initialization routine failed Code: 1115Description: A system shutdown is in progress Code: 1116Description: Unable to abort the system shutdown because no shutdown was in progress Code: 1117Description: The request could not be performed because of an I/O device error Code: 1118Description: No serial device was successfully initialized. The serial driver will unload Code: 1119Description: Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened Code: 1120Description: A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) Code: 1121Description: A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) Code: 1122Description: No ID address mark was found on the floppy disk Code: 1123Description: Mismatch between the floppy disk sector ID field and the floppy disk controller track address Code: 1124Description: The floppy disk controller reported an error that is not recognized by the floppy disk driver Code: 1125Description: The floppy disk controller returned inconsistent results in its registers Code: 1126Description: While accessing the hard disk, a recalibrate operation failed, even after retries Code: 1127Description: While accessing the hard disk, a disk operation failed even after retries Code: 1128Description: While accessing the hard disk, a disk controller reset was needed, but even that failed Code: 1129Description: Physical end of tape encountered Code: 1130Description: Not enough server storage is available to process this command Code: 1131Description: A potential deadlock condition has been detected Code: 1132Description: The base address or the file offset specified does not have the proper alignment Code: 1140Description: An attempt to change the system power state was vetoed by another application or driver Code: 1141Description: The system BIOS failed an attempt to change the system power state Code: 1142Description: An attempt was made to create more links on a file than the file system supports Code: 1150Description: The specified program requires a newer version of Windows Code: 1151Description: The specified program is not a Windows or MS-DOS program Code: 1152Description: Cannot start more than one instance of the specified program Code: 1153Description: The specified program was written for an earlier version of Windows Code: 1154Description: One of the library files needed to run this application is damaged Code: 1155Description: No application is associated with the specified file for this operation Code: 1156Description: An error occurred in sending the command to the application Code: 1157Description: One of the library files needed to run this application cannot be found Code: 1158Description: The current process has used all of its system allowance of handles for Window Manager objects Code: 1159Description: The message can be used only with synchronous operations Code: 1160Description: The indicated source element has no media Code: 1161Description: The indicated destination element already contains media Code: 1162Description: The indicated element does not exist Code: 1163Description: The indicated element is part of a magazine that is not present Code: 1164Description: The indicated device requires reinitialization due to hardware errors Code: 1165Description: The device has indicated that cleaning is required before further operations are attempted Code: 1166Description: The device has indicated that its door is open Code: 1167Description: The device is not connected Code: 1168Description: Element not found Code: 1169Description: There was no match for the specified key in the index Code: 1170Description: The property set specified does not exist on the object Code: 1171Description: The point passed to GetMouseMovePointsEx is not in the buffer Code: 1172Description: The tracking (workstation) service is not running Code: 1173Description: The Volume ID could not be found Code: 1175Description: Unable to remove the file to be replaced Code: 1176Description: Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name Code: 1177Description: Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name Code: 1178Description: The volume change journal is being deleted Code: 1179Description: The volume change journal is not active Code: 1180Description: A file was found, but it may not be the correct file Code: 1181Description: The journal entry has been deleted from the journal Code: 1200Description: The specified device name is invalid Code: 1201Description: The device is not currently connected but it is a remembered connection Code: 1202Description: The local device name has a remembered connection to another network resource Code: 1203Description: No network provider accepted the given network path Code: 1204Description: The specified network provider name is invalid Code: 1205Description: Unable to open the network connection profile Code: 1206Description: The network connection profile is corrupted Code: 1207Description: Cannot enumerate a noncontainer Code: 1208Description: An extended error has occurred Code: 1209Description: The format of the specified group name is invalid Code: 1210Description: The format of the specified computer name is invalid Code: 1211Description: The format of the specified event name is invalid Code: 1212Description: The format of the specified domain name is invalid Code: 1213Description: The format of the specified service name is invalid Code: 1214Description: The format of the specified network name is invalid Code: 1215Description: The format of the specified share name is invalid Code: 1216Description: The format of the specified password is invalid Code: 1217Description: The format of the specified message name is invalid Code: 1218Description: The format of the specified message destination is invalid Code: 1219Description: Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again Code: 1220Description: